JVC USA

JVC Customer Support

Software Updates

For Latest Support information and Downloads, please visit http://www3.jvckenwood.com/english/download/

End-User License Agreement
Before you download any software or firmware you must agree to our End-User License Agreement.
Installing or using the firmware indicates your acceptance of these terms and conditions.
View the End-User License Agreement

GPL/LGPL Source code is available to you, please visit http://www3.jvckenwood.com/english/download/gpl/

For BlackCrystal™ HDTV (JLC or JLE series) GPL/LGPL Source Code, please visit http://www.amtranvideo.com/JVCTVsupport/FOSS.html

Projectors

DLA-X500, DLA-X700, DLA-X900 firmware update
The new firmware improves reliability of both RS232C and LAN communication, especially when a test pattern is displayed.
View the DLA-X500 & DLA-X700 & DLA-X900 update procedure
Download the DLA-X500 & DLA-X700 & DLA-X900 update file (zip format)

DLA-X70RBU, DLA-X90RBU firmware update
This update addresses Incorrect color may appear in certain modes.
View the DLA-X70RBU & DLA-X90RBU update procedure
Download the DLA-X70RBU & DLA-X90RBU update file (zip format)

DLA-X90RBU firmware update
This update addresses Projector inoperative under certain conditions, Lens Aperture inoperative under certain conditions, limited the input level of HDMI signal in THX mode, reverse acting of Pixel Shift partially with upside-down installation, calibration inoperative in certain operations, message for fine adjustment when calling Lens memory.
View the DLA-X90RBU update procedure
Download the DLA-X90RBU update file (zip format)

DLA-X70RBU firmware update
This update addresses Projector inoperative under certain conditions, Lens Aperture inoperative under certain conditions, limited the input level of HDMI signal in THX mode, reverse acting of Pixel Shift partially with upside-down installation, calibration inoperative in certain operations, message for fine adjustment when calling Lens memory.
View the DLA-X70RBU update procedure
Download the DLA-X70RBU update file (zip format)

DLA-X30RBU firmware update
This update addresses remaining picture mode display on screen when pushing the picture mode button of the remote controller, Projector inoperative under certain conditions, message for fine adjustment when calling Lens memory.
View the DLA-X30RBU update procedure
Download the DLA-X30RBU update file (zip format)

DLA-X3 firmware update
This update contains HDMI 1.4 improvements.
View the DLA-X3 update procedure
Download the DLA-X3 update file (zip format)

DLA-X7, DLA-X9 firmware update
This update addresses CEC Operation, HDMI compatibility, a Lens-shift direction of the ceiling mode, smoothness of the Color management adjustment, and improve the 2D to 3D (and 3D to 2D) mode switching
View the DLA-X7 & DLA-X9 update procedure
Download the DLA-X7 & DLA-X9 update file (zip format)

DLA-HD350BU firmware update
This update improves IR sensor detection
View the DLA-HD350BU update procedure
Download the DLA-HD350BU update file (zip format)

DLA-HD750BU firmware update
This update improves IR sensor detection and expands Color Management System adjustment range
View the DLA-HD750BU update procedure
Download the DLA-HD750BU update file (zip format)

Everio and Camcorder

GC-XA2 update
This update improves the reliability of the social website connection.
View details

GC-PX100 update
This update improves the reliability of the record operation.
View details

GZ-E300, GZ-E306, GZ-EX310, GZ-EX355, GZ-HM65, and GZ-VX815 update
This update improves the reliability of the record operation.
View details

GC-XA1 update
Update for use with iOS6 devices. Improvement of WiFi function and other stability improvements.
Caution: Please also update the WiVideo iOS App.
View details

GZ-E10 and GZ-HM40 update
This update addresses picture shaking during recording.
View details
Get the GZ-E10 and GZ-HM40 update

Everio MediaBrowser update
This update corrects connection issues.
View details

GC-FM2 and GC-WP10 update
This update improves stability.
View details

GC-FM1 (Picsio) firmware update
This update improves the camera speaker sound and improves the camera's Auto White Balance.
View the GC-FM1 update procedure
Download the GC-FM1 update file (exe format)

GZ-HD3 firmware update
This update address issue when camera doesn’t memorize the date/time settings.
View the GZ-HD3 update procedure
Download the GZ-HD3 update file (zip format)

Car A/V and Navigation

KW-NT800HDT firmware update
Please visit http://www3.jvckenwood.com/english/car/support/navi/nt800hdt/index.html for the latest updates.

KW-NT500HDT firmware update
Please visit http://www3.jvckenwood.com/english/car/support/navi/nt500hdt/index.html for the latest updates.

KW-ADV64BTJ, KW-AV60BTJ, KW-AV60J, KW-AV68BTJW, KW-AV70BTJ, KW-AV78BTJW firmware update
This update improves the Bluetooth compatibility with CDMA phones.
View the update procedure
Download the update file

KD-A805J, KD-R800J, KD-R900J firmware update
This update addresses: Improves audio quality while using hands-free phone.
View the update procedure
Download the update file

KD-A815J, KD-R810J, KW-XR810J firmware update
This update addresses: Improves audio quality while using hands-free phone.
View the update procedure
Download the update file

KD-R710J firmware update
This update addresses: Improves audio quality while using hands-free phone.
View the update procedure
Download the update file

KW-NT3HDT firmware update
Version 1.0.024.1300 as of May 10, 2011
This update addresses:
Improves the HD Radio Artist Experience function.
View the KW-NT3HDT update procedure
Download the KW-NT3HDT update file

KD-R610, KD-A615, KD-R618 firmware update
This update addresses: Missing “FM” Source.
View the update procedure
Download the update file (zip format)

KW-XR610 firmware update
This update addresses: Missing “FM” Source.
View the update procedure
Download the update file (zip format)

KW-NT1 firmware update
The newest firmware update for KW-NT1 Car Navigation system for US and Canadian models is version 1.1.011.0501 as of October 2, 2009.
If the firmware version is 1.0.010.501 or older, you should update to the latest firmware.
View the KW-NT1 update procedure
Download the KW-NT1 update file (zip format)

KW-NT1 StreetDirector Assistant
The StreetDirector Assistant requires the firmware for KW-NT1 Car Navigation system for US and Canadian models is version 1.1.007.0501 or later.
If the firmware version is 1.0.010.501 or older, you must update to the latest firmware.
View the StreetDirector Assistant User Guide.
Download the StreetDirector Assistant.

KW-NX7000 firmware update
The newest firmware update for the KW-NX7000 Car Navigation system for US and Canadian models is version 1.3.4.0 as of September 9, 2009

Firmware Version history:
Version 1.3.4.0 as of September 9, 2009
Problem where GPS may not be positioning at all has been fixed.
Problem where a part of voice guidance is English in the French setting has been fixed.
Problem where a part of house-number may not be able to search has been fixed.

Version 1.2.6.0 as of October 27, 2008
Problem where route guidance may discontinue after detouring has been fixed.
Problem where display may show wrong lane information has been fixed.
Improvement of guidance timing
Improvement of POI Alert timing

View the KW-NX7000 update procedure
Download the KW-NX7000 update file (zip format)

KW-NX7000 map update
The newest map update for the KW-NX7000 Car Navigation system for North America is available from NAVTEQ.
This map update requires firmware version 1.3.4.0
Learn More

KD-HDR30 and KD-AHD39 firmware update
This update address issue when clicking noise is heard if CD is played.
View the KD-HDR30/KD-AHD39 update procedure
Download the KD-HDR30/KD-AHD39 update file (zip format)

KD-NX5000 Update
New version 1.300 is available as of July 20, 2007.

Firmware Version history:
Version 1.300 as of July 20, 2007
Problem where firmware update may fail in some cases has been fixed.
Version 1.200 as of May 31, 2007
4 icons for weather information (Figure 1: SNOW, RAIN, WIND, FOG) have been added to TMC icons.

How to check the current software version:
In NAVIGATION mode, press MENU twice, until INFORMATION menu is shown, SCROLL UP to second page and select VERSION. If PROGRAM number is shown as 1.000 or 1.100 your unit would benefit from software update.

After update is completed unit will need to be calibrated again. Guidance settings (like VOICE or ZOOM options) will be reset but addresses stored in memory will be retained (PREVIOUS, HOME, FAVORITE for example, are not erased).

Instructions and download are available from the following website:
http://www3.jvckenwood.com/english/car/support/navi/nx5000_us/download_soft.html

KVPX9 Update
Application (software) Change History
Current version 1.026 as of March 9, 2007
Modification has been made for new DST (Daylight Saving Time) schedule.
Problem with POI selection for airport on map screen has been fixed.
Version 1.023 as of October 27, 2006
Problem where positioning cannot work when a new GPS satellite is put into operation has been fixed etc.
Version 1.016 as of July 21, 2006
Reroute quality has been improved etc.
Application file to download is approx 10MB.

KVPX9 Software Update Version 060627.00.103J and
KVPX9 Database Update Version 01.016.442.00 are available from here:
http://www3.jvckenwood.com/english/car/support/navi/px9/index.html
Please read the instructions before performing the update.

Video, DVD & Blu-ray

XV-BP1 firmware update
This update addresses playback issues with some movies: playability and stability.
View the XV-BP1 update and procedure.

XV-BP10 / XV-BP11 firmware update
This update addresses playback issues with some movies: playability and stability.
View the XV-BP10 / XV-BP11 update and procedure.

DR-MV79 firmware update
This update address issue when recording is interrupted due to copy protection as well as digital audio output improvement when HDMI is used.
View the DR-MV79 update procedure
Download the DR-MV79 update file (zip format)

DR-MV100 firmware update
This update address issue when recording is interrupted due to copy protection as well as digital audio output improvement when HDMI is used.
View the DR-MV100 update procedure
Download the DR-MV100 update file (zip format)

Television

LT-42B300 firmware update
For latest Blu-ray disc compatibility
View the LT-42B300 update procedure
Download the LT-42B300 update file (zip format)

For BlackCrystal™ HDTV (JLC or JLE series)Firmware download, please visit http://www.amtranvideo.com/JVCTVsupport/FOSS.html.

Audio and Home Theater

RD-N1 firmware update:
This update addresses:
Corrects other brand LCD remotes from affecting operation of this model
View the update procedure
Download the update file (zip format)

RV-NB50 and RV-NB52 firmware update:
This update addresses:
Improvemed iPod Touch Connection
Improvemed sound quality
Improvemed timer set method
View the update procedure
Download the update file (zip format)

TH-D5 and TH-D50 firmware update:
This software update address issue when a thin blue line along left edge of High Definition TV screen is visible when connected thru HDMI to TH-D5/D50.
View the THD5 and THD50 update procedure
Download the THD5 and THD50 update file (zip format)

TH-D60 firmware update:
This software update address issue when a thin blue line along left edge of High Definition TV screen is visible when connected thru HDMI to TH-D60.
View the THD60 the update procedure
Download the THD60 update file (zip format)

CyberLink Media Server
Update version 1.1
for DD-3 Network Media System
After installing CyberLink Media Server from the supplied CD-ROM, it is recommended that you upgrade CyberLink Media Server to enable you to utilize the latest functions. Refer to the web-site http://www3.jvckenwood.com/english/download/index.html for upgrading CyberLink Media Server.

XA-HD500 Firmware Upgrade Version 1.00.1071:
This firmware version address the issue when a high speed USB 2.0 HUB is connected to your PC and a mixture of slower FULL or LOW SPEED USB devices are connected to the HUB, then the PC may not recognize XA-HD500 properly.
Please read the instructions, before attempting to upgrade the firmware.